|
| Model |
12KSS60400/50400 |
| Capacity |
12KVA/8.4KW |
| Input |
| Voltage |
220V -15%/+20% *see note |
Current
Requirement |
220V - 60A @ Full Load (90A @ Current limit) |
| 120V - 110A @ Full Load (150A @ Current limit) |
| Frequency |
50Hz or 60Hz ±5% |
| Output |
| Voltage |
120V (Locked) |
| Frequency |
400Hz |
| Voltage Regulation |
±1% |
| Frequency Stability |
±0.016Hz (Xtal oscillator) |
| Transient Response |
±3% (100% load variation.)
No load to full load with full recovery within 5 cycles |
| Waveform |
Sinewave THD <3% at 0-100% linear load |
| Output Current @.7PF |
220V - 54.5A |
| 120V - 100A |
| Efficiency |
| AC to AC |
>85% |
| Power Factor |
0.8 |
| Crest Ratio |
3:1 |
| Protection |
| Overload |
150% 30Sec cutoff (Current Limited) |
| Overload Capacity |
110% continuous,110-150% load 30 seconds, over
150% causes unit to shut down. Auto restart upon removal of
the overload. |
| Short Circuit |
Unit will cut off and must be manually restarted |
| EMI Filter |
10-100KHz at 40dB, 100KHz-100MHz at 70dB |
| Audible Alarm |
| Overload |
Sounds continuously |
| Fault |
Sounds continuously |
| Indicator |
| LCD |
Converter status, O/P voltage, O/P frequency,
O/P Power |
| LED |
| Line: Green LED |
Inverter: Green LED |
| Fault: Red LED |
Overload: Yellow LED |
|
| Environment |
| OperationTemp. |
-10-50%ºC; 14-122ºF |
| Relative Humidity |
20-90% non-condensing |
| Audible Noise |
Less than 72dB (at 1 meter) |
| Physical |
| Input |
Terminal Block |
| Output |
Terminal Block (Worldwide outlets available) |
| Net Weight |
366lbs/166.4kg |
| Width |
18.9in/48cm |
| Depth |
13.6in/34.5cm |
| Height |
34in/86.4cm |
| Note: Input voltages of 208V single phase
(phase-to-phase on a 3-phase 120/208V line)- with 2 hot lines
and 240V single phase (from a 120/20V split-phase source) -
2 hot lines are both acceptable with one hot on the input N
ternimal, and another hot on the L2 input terminal. |
Specifications subject to change without notice. |
 Print This Page
|
|
