Single Phase Frequency Converters 50/60 Hz
18 models 1KVA to 20KVA
50 or 60hz input,
50hz or 60hz output Single Phase Frequency Converters 400hz
18 models 1KVA to 20KVA
50hz or 60hz input and
400hz output
Three Phase Solid State Frequency Converters
50 or 60 Hz
57 models 10 to 320KVA Three Phase Solid State Frequency Converters
400hz
57 models 10 to 320KVA
Solid State Design Considerations Manuals and Connection Diagrams Accessories
Outdoor Enclosures, Carts,
Distribution Panels etc. Application
Notes and Photos
solid state frequency converter
rotary frequency converter
Rotary 1 or 3 Phase Frequency Converters
50 or 60hz output
6KVA to 2000KVA Rotary 400Hz output Frequency Converters
1 or 3phase
10KVA to 250 KVA
Rotary Frequency Converters Accessories
Enclosures (Indoor quietized and Outdoor) Digital Meters, RS232 and Data Logging, etc. Rotary Design Considerations Starting Surge of motors in the load, Large SCR loads, power factor and resistive loads, Operating Noise Level.
Rotary Application Notes and Photos Operating Noise and solutions to this problem Line Isolation Sets
  Visicomm Industries Company Profile Contact Us Site Map
Solid State Frequency ConverterRotary Frequency Converter
solid state frequency converter rotary frequency converter

Electrocon Frequency Converters

60 to 50 Hz · 50 to 60 Hz · 60 to 60 Hz Isolation · 50/60 to 400 Hz

1.5KVA Solid State Frequency Converter Specifications
 
which frequency converter design
which size frequency converter
buy or rent frequency converter

Printer Friendly Version

Model 1.5KSS6050/5060
Capacity 1.5KVA/1050W
Input
Voltage 120 or 220V
Voltage Range 120V-15%/+20% or 220V-15%/+20%
Current
Requirement		 220V - 7.8A @ Full Load (11.8A @ Current limit)
120V - 14.4A @ Full Load (21.6A @ Current limit)
Frequency Any Frequency from 45 - 65 hz (specify if 400hz)
Phase Single
Output
Voltage 120 or 220Vac ±20% Adjustable from nominal
Voltage Regulation ±1% From setpoint
Frequency 50Hz or 60Hz (selectable with switch)
(400 Hz available)
Frequency Regulation ±.0005 Hz
Harmonic Distortion < 3% at 100% Linear Load
Output Waveform Pure Sinewave
Output Current @ .7pf 220V-6.8A
120V-12.5A
Non-Linear Peak Current for 30 sec. 220V-10.2A
120V-18.8A
Power Factor 0.7
Efficiency  
AC to AC >85%
Protection  
Overload Capacity 110% continuous, 110-150% load 30 seconds, over 150% causes unit to shut down. Auto restart upon removal of overload.
Short Circuit Unit will cut out and must be manually restarted
EMI Filter 10-100KHz at 40dB, 100KHz-100MHz at 70dB (CE Approved)
Over Temperature Inverter auto cut-off when heat sink temp. over 80° C
Audible Alarm  
Overload Sounds continuously
Converter Fault Sounds continuously
Indicator  
LCD Converter status, INPUT & OUTPUT voltage-frequency, loading %
LED Line(Utility Power On): Green LED Fault: Red LED
Inverter(Converter Power Output): Green LED
Overload: Yellow LED
Environment  
Operation Temp. -10 to 50° C; 14-122° F
Relative Humidity 20-90% non-condensing
Audible Noise < 45dB
Physical  
Net Weight

144lbs/64.8kg
Dimension  
Depth

21 3/8in/54.2cm
Width

7 1/8in/18.1cm
Height

19 3/8in/49.3cm

Specifications subject to change without notice.
Solid State 6KVA