ELECTROCON FREQUENCY CONVERTERS

FREQUENCY CONVERTERS · MOTOR GENERATORS · SOLID STATE
60 to 50 Hz · 50 to 60 Hz · 60 to 60 Hz Isolation · 50/60 to 400 Hz

SOLID STATE CONSTRUCTION

SOLID STATE CONSTRUCTION TO 1 to 12 KVA

Solid state transistorized compact enclosure less than 60DbA at 3ft. - any single phase input, any single phase output - any input frequency, and 50Hz, 60Hz or 400Hz output.  All of our products are available for purchase, monthly rental or lease to purchase. The following are 50 or 60 Hz output, switchable. 400Hz output is also available (see below).
All units can be furnished with an optional battery backup in a separate plug-in enclosure at additional cost.

Perhaps the best way to illustrate the functional versatility of our units is to start with a rear view photo showing the typical controls and connection terminals. Click here. Scan down and read the information on input and output, and then click on the photo to read the function labels on the controls.

Specifications

Solid State - 1KVA to 12KVA (1 Phase)

50hz or 60hz OUTPUT	400hz OUTPUT
1 KVA 60/50 Hz 1.5 KVA 60/50 Hz 2 KVA 60/50 Hz 3 KVA 60/50 Hz	1 KVA 400Hz 2 KVA 400Hz 3 KVA 400Hz
4 KVA 60/50 Hz 5 KVA 60/50 Hz 6.25 KVA 60/50 Hz	4 KVA 400 Hz 5 KVA 400 Hz 6 KVA 400 Hz
8 KVA 60/50 Hz 10 KVA 60/50 Hz	8 KVA 400 Hz 10 KVA 400 Hz
12KVA 60/50 Hz	12 KVA 400 Hz
10KVA to 50KVA (1 Phase input 3 Phase output)	10KVA to 50KVA (1 Phase input 3 Phase output)
10KVA to 50KVA (3 Phase input 1 Phase output)	10KVA to 50KVA (3 Phase input 1 Phase output)

Solid State - 10KVA to 160KVA (3 Phase)

.

Solid State Accessories

Battery Backup

The purpose of a battery backup for a frequency converter is to provide uninterrupted power output in the event of a utility outage for a limited time. Accordingly, when the utility fails, the unit sounds a series of beeps, and the battery light comes on to notify the user that the unit is starting to operate on battery.

The battery enclosure is designed to sit beside the frequency converter, and is furnished with a short cord that serves as a plug-in interconnection cable. The unit is shipped complete with 16 interconnected 12 VDC sealed batteries already in the enclosure.

The standard battery set will support a fully loaded (the chances are the unit will not be fully loaded at all times during a power outage) unit for:

Model Duration*

   * If longer times are required, we can provide up to 5 times as long using larger AH batteries in a slightly larger enclosure.

The batteries are not fully charged when shipped, and it is recommended that the unit be left on overnight to bring the batteries up to charge.

When using this accessory, do not attempt to shut down the converter by disconnecting the utility line - doing this will not shut down the converter, but result in a fully discharged battery.

To shut down the converter output, push the on-off switch.

All of out solid state units can be furnished with weatherproof outdoor enclosures. The photo shows a 3KVA unit designed to power 60 Hz tools on the tarmac at an airport in a 50 Hz country. Operating power is supplied by the airport's portable 50 Hz generators. The unit was furnished with a 50 ft. cord and plug set with strain relief. The photo shown is out of proportion, click on the photo to show a better view.

Front / Right side view of the battery enclosure.


Rear / Left side view of the battery enclosure (showing plug socket).

Enclosures

Right front view.

Head-on view.